DIG® 4 GPH Pressure-Compensating Emitters
Irrigate for efficiency. This pressure compensating, 4 GPH emitter has a barbed inlet for installation into drip tubing.
Irrigate for efficiency. This pressure compensating, 4 GPH emitter has a barbed inlet for installation into drip tubing.
Used as a feeder line from the drip emitter. Stronger and stiffer than vinyl tubing. For use with 1/4" barbed micro fittings. Characteristics Max...
View full detailsUse as a supply line for irrigation above or below ground. Drip emitters can be placed directly into the tubing. Characteristics Maximum flow rat...
View full detailsManifold used to distribute water throughout the garden from a main line. Converts a 1/2" riser into eight individually adjustable 1/4" drip lines....
View full detailsCoupling to run emitters to individual plants for drip irrigation. Characteristics Barbed design Working pressure rated from 0-50 PSI 1/4" connect...
View full detailsTee shaped joint to join or split 1/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteristi...
View full detailsA coupler for connecting two lines of .700" OD poly tubing. Compression couplers do not require glue or clamps. Characteristics Available in each ...
View full detailsCoupling to run emitters to individual plants for drip irrigation. Characteristics Barbed design Working pressure rated from 0-50 PSI 1/4" connect...
View full detailsTee shaped joint to join or split 1/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteristi...
View full detailsBarbed plug with two different-sized ends used to plug holes on drip line and drip tubing or to close the end of irrigation tubing. Characteristics...
View full detailsPlastic stake used to support above ground poly tubing. Works with 1/4" poly tubing by inserting tubing on top of stake. Characteristics Works wit...
View full detailsCopyright © 2022 Green Acres Nursery & Supply.