skip to content
Drip sprinkler head that emits streams of water with built-in valves to adjust coverage and flow of water. 180° 5-stream coverage can be adjusted between a three-inch to 2' radius at 30 PSI. Six-inch spike is available as terminal or in-line models.
A coupler for connecting two lines of .700" OD poly tubing. Compression couplers do not require glue or clamps. Characteristics Available in each ...
View full details
Color-coded for 1 GPH with barbed inlet for installation into drip tubing. Characteristics Available in each or 100 packs Constructed of high qua...
View full details
Color-coded for 1/2 GPH with barbed inlet for installation into drip tubing. Characteristics Available in each or 100 packs Constructed of high q...
View full details
Coupling to run emitters to individual plants for drip irrigation. Characteristics Barbed design Working pressure rated from 0-50 PSI 1/4" connect...
View full details
Cross shaped joint to join or split 3/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteris...
View full details
Pressure regulator used to reduce and regulate incoming water to a micro drip irrigation system. Offers consistent pressure given a range of incomi...
View full details
Cross shaped joint to join or split 3/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteris...
View full details
Cross shaped joint to join or split 17mm poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteris...
View full details
Universal key punch allows for easy installation or removal of micro drip fittings and spray heads. Punch perfectly sized holes with one end, or ge...
View full details
Perfectly sized to secure irrigation drip tubing to the ground. Characteristics 14 gauge
