Drip Accessories

Secure weed fabric, frost cloth, poly tubing and dripline utilizing these staples.  Characteristics 100 pack 6" tall 11 Gauge Constructed of metal...

Used as a feeder line from the drip emitter. Stronger and stiffer than vinyl tubing. For use with 1/4" barbed micro fittings. Characteristics  Max...

Use as a supply line for irrigation above or below ground. Drip emitters can be placed directly into the tubing. Characteristics  Maximum flow rat...

Use above ground to direct water right where it's needed. This stronger and stiffer than vinyl tubing connects to drip or micro tubing with 1/4" ba...

Use to convert a 1/2" sprinkler riser into a low-flow drip irrigation zone. Characteristics Works with 1/2", .670 OD, .700 OD or .704 OD drip line...

Used as a feeder line from the drip emitter. More flexible than poly tubing. For use with 1/4" barbed micro fittings. Characteristics  Maximum pre...

Y-shaped filter keeps drip lines clear of debris and particulate, reducing clogs and wear and tear. Available with either threaded hose or pipe con...

Two-in-one filter and pressure regulator combines a mesh stainless steel filter with a pressure regulator, reducing the number of components needed...

Universal key punch allows for easy installation or removal of micro drip fittings and spray heads. Punch perfectly sized holes with one end, or ge...

Rigid stake riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to 1/4" tubing. Available in 8" and 12" sizes w...

Quick action valve allows easy flow control in main drip lines. A simple quarter turn adjusts from "OFF" to full flow rates. Available in a variety...

High volume output with an umbrella pattern. Pressure compensation delivers consistent flow rate and throw diameter at all operating pressures. Com...

High volume output with an umbrella pattern. Coverage and flow can be adjusted by rotating the cap head. Comes on a stake with a barb connector for...

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to 1/4" tubing. Characteristics 12" tall riser Fits...

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to 1/4" tubing. Characteristics 6" tall riser Fits ...

Micro Saddle provides a secure, leak free connection to LDPE tubing. Self-piercing inner spike allows for easy installation. Barbed take-off adapte...

Micro valve with 3/4" barbed connection. Use to install a shutoff along a drip line to control flow for variable watering schedules. Characteristic...

Cross shaped joint to join or split 3/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteris...

Drip line pressure reducer available in either 26 or 36 PSI models. Threaded hose-end connection easily fits to faucet or hose connection. Characte...

In-line filter keeps drip lines clear of debris and particulate, reducing clogs and wear and tear. 5/8" barbed inlet and outlet easily connects to ...

Connects 17mm drip to line to 3/4" hose ends. 17mm connection is barbed to lock in place. 3/4" FPT end is threaded to attach to standard hoses or o...

End plug used to close the terminal end of a 17mm drip line. Barbed design holds plug in place. Characteristics Barbed design Working pressure rat...

Cross shaped joint to join or split 17mm poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteris...

Tee shaped joint to join or split 1/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteristi...

Pressure regulator used to reduce and regulate incoming water to a micro drip irrigation system. Offers consistent pressure given a range of incomi...

Manifold used to distribute water throughout the garden from a main line. Converts a 1/2" riser into eight individually adjustable 1/4" drip lines....

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to either 1/4" distribution tubing or threaded, 1/2" ...

Plastic stake used to support above ground poly tubing. Works with 1/4" poly tubing by inserting tubing on top of stake. Characteristics Works wit...

A grab-and-go kit that has everything you need to create a new drip irrigation zone. Kit includes Y-Filter, 30 PSI pressure regulator, 1" MIPT x 3/...

High volume output with an umbrella pattern. Coverage and flow can be adjusted by rotating the cap head. Comes on a stake with a barb connector for...

Two-in-one filter and pressure regulator combines a mesh stainless steel filter with a pressure regulator, reducing the number of components needed...