Drip Irrigation

A coupler for connecting two lines of .700" OD poly tubing. Compression couplers do not require glue or clamps. Characteristics Available in each ...

Color-coded for 1 GPH with barbed inlet for installation into drip tubing.  Characteristics Available in each or 100 packs Constructed of high qua...

Color-coded for 1/2 GPH with barbed inlet for installation into drip tubing.  Characteristics Available in each or 100 packs Constructed of high q...

Coupling to run emitters to individual plants for drip irrigation. Characteristics Barbed design Working pressure rated from 0-50 PSI 1/4" connect...

Cross shaped joint to join or split 3/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteris...

Tee shaped joint to join or split 1/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteristi...

Barbed plug with two different-sized ends used to plug holes on drip line and drip tubing or to close the end of irrigation tubing. Characteristics...

Micro Saddle provides a secure, leak free connection to LDPE tubing. Self-piercing inner spike allows for easy installation. Barbed take-off adapte...

Plastic stake used to support above ground poly tubing. Works with 1/4" poly tubing by inserting tubing on top of stake. Characteristics Works wit...

Perfectly sized to secure irrigation drip tubing to the ground. Characteristics 14 gauge

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to 1/4" tubing. Characteristics 12" tall riser Fits...

Cross shaped joint to join or split 17mm poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteris...

Connects 17mm drip to line to 3/4" hose ends. 17mm connection is barbed to lock in place. 3/4" FPT end is threaded to attach to standard hoses or o...

End plug used to close the terminal end of a 17mm drip line. Barbed design holds plug in place. Characteristics Barbed design Working pressure rat...

Color-coded for 2 GPH with barbed inlet for installation into drip tubing.  Characteristics Available in each or 100 packs Constructed of high qua...

Micro valve with 3/4" barbed connection. Use to install a shutoff along a drip line to control flow for variable watering schedules. Characteristic...

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to 1/4" tubing. Characteristics 6" tall riser Fits ...

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to either 1/4" distribution tubing or threaded, 1/2" ...

Manifold used to distribute water throughout the garden from a main line. Converts a 1/2" riser into eight individually adjustable 1/4" drip lines....

Drip spray sprinkler head with built for optimum flow even at low operating pressures. 180 degree spray emits between 8.6 GPH with 10 PSI and 14.7 ...

Drip spray sprinkler head with built for optimum flow even at low operating pressures. 360 degree spray emits between 8.6 GPH with 10 PSI and 14.7 ...

Drip spray sprinkler head with built for optimum flow even at low operating pressures. 90 degree spray emits between 8.6 GPH with 10 PSI and 14.7 G...

Drip spray sprinkler head delivers a consistent flow rate given a range of in-line PSI. Spray operates best between 20 to 45 PSI. 180° spray reache...

Drip spray sprinkler head delivers a consistent flow rate given a range of in-line PSI. Spray operates best between 20 to 45 PSI. 360° spray reache...

Drip spray sprinkler head delivers a consistent flow rate given a range of in-line PSI. Spray operates best between 20 to 45 PSI. 90° spray reaches...

Drip head on spike delivers a consistent flow rate of one gallon per hour. Emitter tolerates in-line pressure between 10 and 40 PSI. Spike easily i...

Drip head on spike delivers a consistent flow rate of one half gallon per hour. Emitter tolerates in-line pressure between 10 and 40 PSI. Spike eas...

Drip head on spike delivers a consistent flow rate of two gallon per hour. Emitter tolerates in-line pressure between 10 and 40 PSI. Spike easily i...

Irrigate for efficiency. This pressure compensating, 4 GPH emitter has a barbed inlet for installation into drip tubing.  Characteristics Availabl...

Drip spray sprinkler head with built in pressure compensation for optimum flow even at low operating pressures. C frame design delivers uniform, 36...

Use to convert a 1/2" sprinkler riser into a low-flow drip irrigation zone. Characteristics Works with 1/2", .670 OD, .700 OD or .704 OD drip line...

Rigid stake riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to 1/4" tubing. Available in 8" and 12" sizes w...

Use above ground or under mulch to slowly apply water to the root zone.  Pre-inserted, 1 GPH emitters are evenly spaced 12" apart. Characteristics ...

Emits a single point water source for an actuate, water efficient drip system. Flag top can be twisted and removed for easy cleaning. Characteristi...

Secure weed fabric, frost cloth, poly tubing and dripline utilizing these staples.  Characteristics 100 pack 6" tall 11 Gauge Constructed of metal...

Drip spray sprinkler head with adjustable throw range to reduce overspray and runoff. 180° spray angle can be adjusted to spray up to 8' radius. Av...

Drip spray sprinkler head with adjustable throw range to reduce overspray and runoff. 360° spray angle can be adjusted to spray up to 20' diameter....

Drip spray sprinkler head with adjustable throw range to reduce overspray and runoff. 90° spray angle can be adjusted to spray up to 8' radius. Ava...

Designed with wall mounting brackets for up to eight pots that can be hung vertically, along with a watering system to deliver controlled amounts o...

Adjustable drip sprinkler head allows simultaneous adjustment of flow rate and diameter of throw. Twisting the top click to indicate increased flow...

Set up your irrigation system for convenience and efficiency with this 1/4" drip tubing. With .5 GPH pressure-compensated emitters built in, this i...

High volume output with an umbrella pattern. Coverage and flow can be adjusted by rotating the cap head. Comes on a stake with a barb connector for...

High volume output with an umbrella pattern. Pressure compensation delivers consistent flow rate and throw diameter at all operating pressures. Com...

Drip spray sprinkler head with adjustable flow rate and throw distance. Sturdy C frame design delivers uniform water distribution. 360° coverage is...

Drip sprinkler head that emits streams of water with built in valves to adjust coverage and flow of water. 180° 5-stream coverage can be adjusted b...

Drip sprinkler head that emits streams of water with built-in valves to adjust coverage and flow of water. 180° 5-stream coverage can be adjusted b...

Drip sprinkler head that emits streams of water with pre-defined flow rate and radius distance. 180° 5-stream coverage has 1.3ft throw radius at 8 ...

Drip sprinkler head that emits streams of water with built in valves to adjust coverage and flow of water. 360° 8-stream coverage can be adjusted b...