Irrigation & Drainage

Drip spray sprinkler head with adjustable throw range to reduce overspray and runoff. 180° spray angle can be adjusted to spray up to 8' radius. Av...

Drip spray sprinkler head with adjustable throw range to reduce overspray and runoff. 90° spray angle can be adjusted to spray up to 8' radius. Ava...

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to 1/4" tubing. Characteristics 12" tall riser Fits...

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to 1/4" tubing. Characteristics 6" tall riser Fits ...

Micro valve with 3/4" barbed connection. Use to install a shutoff along a drip line to control flow for variable watering schedules. Characteristic...

Cross shaped joint to join or split 3/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteris...

Drip head on spike delivers a consistent flow rate of two gallon per hour. Emitter tolerates in-line pressure between 10 and 40 PSI. Spike easily i...

Drip head on spike delivers a consistent flow rate of one gallon per hour. Emitter tolerates in-line pressure between 10 and 40 PSI. Spike easily i...

Cross shaped joint to join or split 17mm poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteris...

Drip sprinkler head that emits streams of water with built-in valves to adjust coverage and flow of water. 180° 5-stream coverage can be adjusted b...

Drip spray sprinkler head with built for optimum flow even at low operating pressures. 90 degree spray emits between 8.6 GPH with 10 PSI and 14.7 G...

Drip spray sprinkler head with built for optimum flow even at low operating pressures. 360 degree spray emits between 8.6 GPH with 10 PSI and 14.7 ...

Drip spray sprinkler head with built for optimum flow even at low operating pressures. 180 degree spray emits between 8.6 GPH with 10 PSI and 14.7 ...

Tee shaped joint to join or split 1/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteristi...

Manifold used to distribute water throughout the garden from a main line. Converts a 1/2" riser into eight individually adjustable 1/4" drip lines....

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to either 1/4" distribution tubing or threaded, 1/2" ...

High volume output with an umbrella pattern. Coverage and flow can be adjusted by rotating the cap head. Comes on a stake with a barb connector for...

A coupler for connecting two lines of .700" OD poly tubing. Compression couplers do not require glue or clamps. Characteristics Available in each ...