Secure weed fabric, frost cloth, poly tubing and dripline utilizing these staples.  Characteristics 100 pack 6" tall 11 Gauge Constructed of metal...

Manifold used to distribute water throughout the garden from a main line. Converts a 1/2" riser into eight individually adjustable 1/4" drip lines....

Drip spray sprinkler head with built for optimum flow even at low operating pressures. 180 degree spray emits between 8.6 GPH with 10 PSI and 14.7 ...

Drip spray sprinkler head with built for optimum flow even at low operating pressures. 360 degree spray emits between 8.6 GPH with 10 PSI and 14.7 ...

Drip spray sprinkler head with built for optimum flow even at low operating pressures. 90 degree spray emits between 8.6 GPH with 10 PSI and 14.7 G...

Designed with wall mounting brackets for up to eight pots that can be hung vertically, along with a watering system to deliver controlled amounts o...

Set up your irrigation system for convenience and efficiency with this 1/4" drip tubing. With .5 GPH pressure-compensated emitters built in, this i...

High volume output with an umbrella pattern. Coverage and flow can be adjusted by rotating the cap head. Comes on a stake with a barb connector for...

High volume output with an umbrella pattern. Coverage and flow can be adjusted by rotating the cap head. Comes on a stake with a barb connector for...

Used as a feeder line from the drip emitter. Stronger and stiffer than vinyl tubing. For use with 1/4" barbed micro fittings. Characteristics  Max...

Use as a supply line for irrigation above or below ground. Drip emitters can be placed directly into the tubing. Characteristics  Maximum flow rat...

Pot-side mounting watering solution features an adjustable, gentle stream pattern that reduces erosion. Can be used in a variety of container sizes...

Drip head on spike delivers a consistent flow rate of one gallon per hour. Emitter tolerates in-line pressure between 10 and 40 PSI. Spike easily i...

Drip head on spike delivers a consistent flow rate of two gallon per hour. Emitter tolerates in-line pressure between 10 and 40 PSI. Spike easily i...

Use above ground to direct water right where it's needed. This stronger and stiffer than vinyl tubing connects to drip or micro tubing with 1/4" ba...

Drip sprinkler head that emits streams of water with built in valves to adjust coverage and flow of water. Spike base for anchoring near root zone....

Drip sprinkler head that emits streams of water with built in valves to adjust coverage and flow of water. 5" Spike base for anchoring near root zo...

Use above ground or under mulch to slowly apply water to the root zone.  Pre-inserted, 1 GPH emitters provide even coverage and are anti-siphon to ...

Use above ground or under mulch to slowly apply water to the root zone.  Pre-inserted, 1 GPH emitters are evenly spaced 12" or 18" apart. Built for...

Universal key punch allows for easy installation or removal of micro drip fittings and spray heads. Punch perfectly sized holes with one end, or ge...

Used as a feeder line from the drip emitter. More flexible than poly tubing. For use with 1/4" barbed micro fittings. Characteristics  Maximum pre...