A coupler for connecting two lines of .700" OD poly tubing. Compression couplers do not require glue or clamps. Characteristics Available in each ...

Color-coded for 1 GPH with barbed inlet for installation into drip tubing.  Characteristics Available in each or 100 packs Constructed of high qua...

Color-coded for 1 GPH with barbed inlet for installation into drip tubing.  Characteristics Available in each or 100 packs Constructed of high qua...

Color-coded for 1/2 GPH with barbed inlet for installation into drip tubing.  Characteristics Available in each or 100 packs Constructed of high q...

Color-coded for 1/2 GPH with barbed inlet for installation into drip tubing.  Characteristics Available in each or 100 packs Constructed of high q...

Coupling to run emitters to individual plants for drip irrigation. Characteristics Barbed design Working pressure rated from 0-50 PSI 1/4" connect...

Cross shaped joint to join or split 3/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteris...

Tee shaped joint to join or split 1/4" poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteristi...

Barbed plug with two different-sized ends used to plug holes on drip line and drip tubing or to close the end of irrigation tubing. Characteristics...

Perfectly sized to secure irrigation drip tubing to the ground. Characteristics 14 gauge

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to 1/4" tubing. Characteristics 12" tall riser Fits...

Cross shaped joint to join or split 17mm poly tubing. Can be used to bring drip line to multiple irrigation zones or individual plants. Characteris...

Drip sprinkler head that emits streams of water with built-in valves to adjust coverage and flow of water. 180° 5-stream coverage can be adjusted b...

Color-coded for 2 GPH with barbed inlet for installation into drip tubing.  Characteristics Available in each or 100 packs Constructed of high qua...

Color-coded for 2 GPH with barbed inlet for installation into drip tubing.  Characteristics Available in each or 100 packs Constructed of high qua...

Micro valve with 3/4" barbed connection. Use to install a shutoff along a drip line to control flow for variable watering schedules. Characteristic...

Drip sprinkler head that emits streams of water with built in valves to adjust coverage and flow of water. 360° 8-stream coverage can be adjusted b...

Drip sprinkler head that emits streams of water with built in valves to adjust coverage and flow of water. 360° 8-stream coverage can be adjusted b...

Adjustable drip sprinkler head allows simultaneous adjustment of flow rate and diameter of throw. Twisting the top click to indicate increased flow...

Drip spray sprinkler head with adjustable flow rate and throw distance. Sturdy C frame design delivers uniform water distribution. 360° coverage is...

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to 1/4" tubing. Characteristics 6" tall riser Fits ...

Rigid riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to either 1/4" distribution tubing or threaded, 1/2" ...

Drip spray sprinkler head with adjustable throw range to reduce overspray and runoff. 180° spray angle can be adjusted to spray up to 8' radius. Av...

Drip spray sprinkler head with adjustable throw range to reduce overspray and runoff. 360° spray angle can be adjusted to spray up to 20' diameter....

Drip spray sprinkler head with adjustable throw range to reduce overspray and runoff. 90° spray angle can be adjusted to spray up to 8' radius. Ava...

Constructed of durable materials, rotating sprinkler can be adjusted to alter flow and radius of water coverage. Ideal for over-head water applicat...

Manifold used to distribute water throughout the garden from a main line. Converts a 1/2" riser into eight individually adjustable 1/4" drip lines....

Irrigate for efficiency. This pressure compensating, 4 GPH emitter has a barbed inlet for installation into drip tubing.  Characteristics Availabl...

Use to convert a 1/2" sprinkler riser into a low-flow drip irrigation zone. Characteristics Works with 1/2", .670 OD, .700 OD or .704 OD drip line...

Rigid stake riser used to extend micro-sprayers, misters, or foggers above ground. Can be connected to 1/4" tubing. Available in 8" and 12" sizes w...

Use above ground or under mulch to slowly apply water to the root zone.  Pre-inserted, 1 GPH emitters are evenly spaced 12" apart. Characteristics ...

Quick action valve allows easy flow control in main drip lines. A simple quarter turn adjusts from "OFF" to full flow rates. Available in a variety...

Drip spray sprinkler head with built in Vari-Flow valve to adjust coverage and flow of water.  Characteristics 10/32" threaded connection 360° dri...

Drip spray sprinkler head with built in Vari-Flow valve to adjust coverage and flow of water.  Characteristics 10/32" threaded connection 180° dri...

Drip spray sprinkler head with built in Vari-Flow valve to adjust coverage and flow of water.  Characteristics 10/32" threaded connection 90° drip...

Emits a single point water source for an actuate, water efficient drip system. Flag top can be twisted and removed for easy cleaning. Characteristi...